Solving the problem of distortion and bending of the dried veneer. After research and trial and error with Italian experts, Ao Shi Wood Drying Equipment Manufacturing Co., Ltd. found a solution to replace the conventional vacuum plated vacuum drying kiln. Dry the kiln for drying.

It is understood that since the vacuum drying kiln is pressed with wood at a pressure of up to 8.3T/m2, that is, during the drying process, the wood in the kiln is not movable, so the dried veneer is It can be guaranteed to be very straight and will not cause wave bending and internal cracking. Compared with the conventional kiln, the drying cycle of the vacuum kiln is 3-5 times faster. If the initial moisture content is as high as 60%, the thickness is 3mm, and the eucalyptus veneer is up to 4 meters long until the final moisture content is 8%. The time is only about 5 hours. Therefore, a vacuum drying kiln can dry 3 kiln veneers in one day, and the utilization rate is high.


PU leather

360 degree Spinner wheels that enable mobility over a variety of surfaces especially crowded airports

Ergonomic handle grips allow for maximum control of your suitcase while traveling and moving through crowded airports

Fully lined interior offers two packing compartments with tie-down straps on one side and a zippered divider on the other side to minimize shifting of contents. Zippered pocket holds delicate items and accessories.

Roomy main compartment expands 2 inches on uprights, maximizing space and packing flexibility

Compression Straps - For extra security, reinforcement and ease in adjusting size of bag.

PU Fashion Trolley Luggage

PU Fashion Trolley Luggage,Fashion Trolley Luggage,PU Fashion Travel Trolley Luggage,Fashion Leather Trolley Luggage

Jiangxi Jizhirui Luggage CO.,Ltd. , https://www.luggages.nl